Greenbyte Ideas
Our approach to product feedback
The benefits of giving us your product feedback
What happens to your product feedback
How we choose what to implement
- Customer feedback - there are many ways we listen for your feedback:formal customer interviews and other research activitiesevents like conferences and trade showscomments and votes on issues here in Greenbyte & BluePoint Influence
- CSM team insights - our CSM team knows which issues are the most challenging and most common for customers.
- Product analytics - we track how users move through the system, which helps us understand how existing features are being used.
- Product strategy - our long-term strategic vision for the products.
Custom applications
272 results found
-
Custum Delay for Notifications
This is basically a repeated idea, it was requested 4 times before, but always rejected. Does it fit in the roadmap now to have the same options in the dropdown list for the delay in the notification scheme as there is for an alert?
The current notification delay is quite limited, jumping from 1 hour to 4 hours to 24 hours and ending there, whereas an alert can be set to hourly intervals, up to 30 days.5 votes -
Change the density adjusted wind speed in Power curve analyzer in Data studio as a setting instead of Default
The new feature with density adjusted wind speed in the power curve widget is great. However, the graph in the data studio gets a bit clogged with both options turned on at the same time. It would be good to have this as a setting instead of including both wind speeds by default, in the same way as scatter is a setting to include in the graph
5 votes -
Automatic closing of stop events when the turbine starts generating
For some assets then events have a start date, but do not have an end time due to communication/data issues. In these cases when the turbine start generating, the stop event should end.
Equally, we have the reverse where an event might not have a start date, but the turbine is not generating. It would be good to create a synthetic event for these periods too.
5 votes -
Site maintenance schedule
Have a maintenance schedule for sites with an alert system for overdue works.
- Security Alarm inspections
- CCTV inspections
- Fire Alarm inspections
5 votes -
Data exports - change default setting for file type
Can we have the default setting changed from "one file per aggregate" to "one file for all aggregates"? In 99% of the cases, we need one file including all turbines, so we have to change the setting for each export (and often forget to do so...).
5 votes -
Comparison of actual production data of different years with each other
Hi all,
I wonder if it would be possible to compare actual production data of different calendar years with each other within one widget or dashboard?
I would like to show to the investors a relative comparison of the production years. This is possible in the Report section, but I would like to have it available in the Analyse section.5 votesThanks for your feedback, this is a great request. It's open for voting from other users.
-
HSE ORs difficult to see during log site access
Moving the HSE box to the top of the log site access popup to improve visibility of ORs.
5 votesThanks for your feedback, this is a great request. It's open for voting from other users.
-
Include other data signals with the Status API
When using export data, it is possible to get other datasignals during the time of a status, for example the exact windspeed, nacelle direction etc. at the moment of a status.
This is not yet possible with API using the Status endpoint. Could this be made possible?
5 votesThanks for your feedback, this is a great request. It's open for voting from other users.
-
Breeze App Does Not Have Non-Turbine Devices
Make non-turbine devices visible in the App for quick Live Monitoring checks.
5 votes -
Site time should match SCADA time during summer months (not just in winter!)
In summer when Australia/Melbourne shifts to Australian Eastern Daylight Time (AEDT = UTC+11) 'Site time' does not match the Vestas wind turbines which always follow Australian Eastern Standard Time (AEST = UTC+10). It would be preferable for the Site time to always match the SCADA data. Thanks!
5 votes -
Hide "Devices (opt)" during site access at sites with selected WTSR rules
For sites with selected WTSR rules, the option to choose a device during site access should be hidden. Selecting a device should only be possible at the next step by choosing qualified personell.
5 votesThanks for your feedback, this is a great request. It’s open for voting from other users.
-
Qualifications under Personell
Hello, Is it possible to add more qualifications under personell?
If i would like to see following:
GWO
Medical
Hotwork permitAlso if possible to add a date for:
Issued date:
Expire date:Thanks
5 votesThanks for your feedback, this is a great request. It’s open for voting from other users.
-
Make it possible to upload the Default Power Reduction Mode Allocation List from Vestas to manage curtailments
Vestas turbines with PPC uses Power Derete Internal codes that in Greenbyte is called Curtailment mode signals. These signal indicate a curtailment event that could have direct impact on the contracual availibility depending on how they are categorized. What the signals indicate and how they should be catecorized are listed in the Default Power Reduction Mode Allocation List.
The only way to get the Greenbyte system to take this signals into account in the contractual availibity right now is to create an alert and link that alert to one of your curtailment satuses. It not very optimal (with a growing…
5 votes -
Ability to lock dashboard period when navigating between dashboards
When performing routine checks by going through several dashboards in a row, the period resets each time so one must reselect it again and again.
It would save quite a lot of time (and feel better) to just being able to lock the period and navigate between dashboards while holding on the period first chosen.
5 votesThis is already supported when moving from site to site or device to device, but not between levels (i.e. site—>device). We would like to learn more about what pages you are using when you experience this problem.
We are interested to hear whether this is a problem experienced by other customers so are opening it to votes.
-
More ways to make use of the results of the dirty dozen analysis
The dirty dozen analysis is giving very precious information but it's not always easy to make good use of it.
Looking at turbine level on a portfolio of more than 100 turbines yields pages when exporting as a report.
An alternative, more condensed view would be welcome, which could for example give the possibility to identify the worst offenders. (relates to being able to compare turbines)
Even better would be the possibility to export the results to a worksheet to use and format as we want, via a button in the interface and/or (ideally) from the API.
5 votesThanks for your feedback, this is a great request. It’s open for voting from other users.
-
Add Heatmap graph in Reports
Hello, we would like to have the Heatmap available in Data Studio (https://baywa.greenbyte.cloud/Analyze/DataStudio?link=LfDaSVld-UybPeojGV-u1g) also available in Reports. This would be of great help to show a clear overview of WTGs status availabe/unavailable which several clients have requested, especillay for big windfarm!
Thanks5 votesThanks for your feedback, this is a great request. It’s open for voting from other users.
-
Multiple Target Availabilities
We have different availability targets for our O&M contracts (e.g. time-based with exclusions) compared to for internal reporting and monitoring (e.g. production-based system availability). It would be good to be able to set different targets for different availability KPIs.
You can see how confusing this is with only one availability target number in the Key Metrics attached. In the example the difference is negative for Production-based Availability, but positive for the other availabilities, while this is really down to the calculation methodology for each and not a fair comparison to budget/target availability.
5 votesThanks for your feedback, this is a great request. It’s open for voting from other users.
-
Monthly target availability
We often have seasonal budget availability profiles based on known scheduled maintenance or outages. It would be good to be able to input monthly target availabilities into Greenbyte.
5 votesThanks for your feedback, this is a great request. It’s open for voting from other users.
-
Add turbine "title" in the data.json
In order to obtain "turbine title" in addition to "turbine Id" directly from same json please add the "turbine title" in the data.json.
For instance I am gathering data with data request and always need to make a second request to have the "turbine title" which is not present in data.json and more useful than turbine ID for final utilisation.5 votes -
The Breeze app and missing wind direction
For turbines that don't provide wind direction, please use nacelle direction in the app instead so you can show from where the wind is coming.
You already do this in your web version.5 votes
- Don't see your idea?